Installing Opportunity Detection by using the GUI mode
For UNIX, use the X Window System mode to install Opportunity Detection.
*
Before you install Opportunity Detection, make sure that the available temporary space on the computer where you install Opportunity Detection is more than three times the size of the Opportunity Detection installer.
Make sure that the following components are located in the same directory:
*
IBM EMM suite installer
*
Opportunity Detection
*
InfoSphere Streams file
1.
Complete the following actions to install Opportunity Detection by using the GUI mode:
2.
In a command-line prompt window, navigate to the directory where you have saved the IBM EMM and the Opportunity Detection installers.
3.
Run the following:
./IBM_EMM_installer_full_name_linux.bin
For example:
./IBM_EMM_Installer_9.1.0.0_linux.bin
The IBM EMM Suite Installer opens.
4.
Click OK on the first screen to see the Introduction window.
5.
Follow the instructions on the installer, and click Next.
Use the information in the following table to take the appropriate actions on each window in the EMM installer.
IBM EMM installer GUI
Window
Description
Introduction
This is the first window of the IBM EMM suite installer. You can open the Opportunity Detection installation and upgrade guides from this window.
Click Next to go to the next window.
Response Files Destination
Click the Generate Response File check box if you want to generate response files for your product. Response files store the information that is necessary for the installation of your product. You can use response files for an unattended installation of your product, or to get pre-filled answers if you rerun the installer in the GUI mode
Click Choose to browse to a location where you want to store the response files.
Click Next to go to the next window.
IBM EMM Products
In the Install Set list, select Custom to select the products that you want to install.
In the Install Set area, you can see all the products whose installation files are in the same directory on your computer.
In the Description field, you can view the description of the product that you select in the Install Set area.
Click Next to go to the next window.
Installation Directory
Click Choose to browse to the directory where you want to install IBM EMM.
Click Next to go to the next window.
Select Application Server
Select IBM WebSphere as the application server. Oracle Weblogic is not supported for Opportunity Detection
Click Next to go to the next window.
Platform Database Type
Select IBM DB2 as the database. Opportunity Detection is supported only on IBM DB2.
Click Next to go to the next window.
Platform Database Connection
Enter the following information about your database:
*
Database host name
*
Database port
*
Database name or System ID (SID)
*
Database user name
*
Database password
Click Next to go to the next window.
*
If IBM® EMM products are installed in a distributed environment, you must use the machine name rather than an IP address in the navigation URL for all of the applications in the suite.
Platform Database Connection (continued)
Review and confirm the JDBC connection.
Click Next to go to the next window.
Preinstallation Summary
Review and confirm the values that you added during the installation process.
Click Install to start the installation process.
The Marketing Platform installer opens. If a previous instance of Marketing Platform exists, the instance is upgraded to the current version. If a previous instance of Marketing Platform does not exist, Marketing Platform is installed.
6.
Follow the instructions on the Marketing Platform installer to install or upgrade Marketing Platform. See IBM EMM Marketing Platform Installation Guide for more information.
7.
In the Installation Complete window, click Done.
The Marketing Platform installation is complete, and the Opportunity Detection installer opens.
8.
Use the information in the following table to navigate the Opportunity Detection installer. In the Platform Database Connection window, enter all the required information and click Next to start the Opportunity Detection installer.
Opportunity Detection installer GUI
Window
Description
Introduction
This is the first window of the Opportunity Detection installer. You can open the Opportunity Detection installation and upgrade guides from this window.
Click Next to go to the next window.
Software Licence Agreement
Carefully read the agreement. Use Print to print the agreement. Click Next after you accept the agreement.
Installation Directory
Click Choose to browse to the directory where you want to install Opportunity Detection.
Click Next to go to the next window.
Opportunity Detection Components
Select the Design Time and Run Time check boxes.
Click Next to go to the next window.
Opportunity Detection Web Application Connection Settings
Enter the following information about the web application connection settings:
*
Network domain name
*
Host name
*
Port number
Select the Use secure connection check box if you want to create a secure connection to the web application.
Click Next to go to the next window.
DesignTime Database Setup
Select one of the following check boxes:
*
Automatic database setup
*
Manual database setup
Click Next to go to the next window.
DesignTime Database Type
You can see this window if you selected the Automatic database setup check box in the DesignTime Database Setup window.
Make sure that IBM DB2 is selected.
Click Next to go to the next window.
DesignTime Database Connection
You can see this window if you selected the Automatic database setup check box in the DesignTime Database Setup window.
Enter the following details for the Design Time database:
*
Database host name
*
Database port
*
Database system ID (SID)
*
Database user name
*
Database password
*
If IBM® EMM products are installed in a distributed environment, you must use the machine name rather than an IP address in the navigation URL for all of the applications in the suite.
Click Next to go to the next window.
DesignTime database JDBC Connection
Review and confirm the JDBC connection.
Click Next to go to the next window.
Interact Service Settings
Enter the following information to configure the Interact service:
*
Host name or IP address
*
Port number
Click Next to go to the next window.
RunTime Database Setup
Select one of the following check boxes:
*
Automatic database setup
*
Manual database setup
Click Next to go to the next window.
Detect Database Type (Unix)
Review and confirm your IBM DB2 installation directory.
Click Next to go to the next window.
RunTime Database Connection
Enter the following details for the Run Time database:
*
Database host name
*
Database port
*
Database system ID (SID)
*
Database user name
*
Database password
*
If IBM® EMM products are installed in a distributed environment, you must use the machine name rather than an IP address in the navigation URL for all of the applications in the suite.
Click Next to go to the next window.
RunTime database JDBC Connection
Review and confirm the JDBC connection.
Click Next to go to the next window.
Interact Connector Settings
Enter the following information to configure the Interact Connector:
*
Host name or IP address
*
Port number
Click Next to go to the next window.
Streams Remote Control Service Settings
Enter the following information to configure the Streams Remote Control Service:
*
Host name or IP address
*
Port number
Click Next to go to the next window.
Preinstallation Summary
Review and confirm the values that you added during the installation process.
Click Install to start the installation process.
The Opportunity Detection installer opens.
Installation Complete
Click Done to close the Opportunity Detection installer and go back to the IBM EMM installer.
Go back to the IBM EMM Suite Installer.
9.
Follow the instructions on the IBM EMM installer to finish installing Opportunity Detection.
Use the information in the following table to take the appropriate actions on each window in the EMM installer.
EMM installer GUI
Window
Description
Deployment EAR file
Specify whether you want to create an enterprise archive (EAR) file to deploy your IBM EMM products.
Click Next to go to the next window.
Package EAR file
You can see this window if you select Create an EAR file for deployment in the Deployment EAR file window.
Select the applications that you want to package in the EAR file.
EAR file details
Enter the following information for your EAR file:
*
Enterprise application identifier
*
Display name
*
Description
*
EAR file path
EAR file details (continued)
Select Yes or No to create an additional EAR file. If you select Yes, you must enter the details for the new EAR file.
Click Next to complete the installation of your product.
Deployment EAR file
Specify whether you want to create another EAR file to deploy your IBM EMM products.
Click Next to go to the next window.
Installation Complete
This window provides the locations of the log files that are created during installation.
Click Previous if you want to change any installation details.
Click Done to close the IBM EMM installer.
Creating an EAR file after running the installer
Completing manual installation of Opportunity Detection
Copyright IBM Corporation 2013. All Rights Reserved.