Campaign|partitions|partition[n]|server|internal
The internalIdUpperLimit and
internalIdLowerLimit properties constrain the
Campaign internal IDs to be within the specified range. Note that the values are inclusive: that is,
Campaign may use both the lower and upper limit.
Campaign|partitions|partition[n]|server|internal
The internalIdUpperLimit and
internalIdLowerLimit properties constrain the
Campaign internal IDs to be within the specified range. The values are inclusive: that is,
Campaign may use both the lower and upper limit. If
Distributed Marketing is installed, set the value to
2147483647.
Campaign|partitions|partition[n]|server|internal
Indicates that eMessage is installed. When you select
Yes,
eMessage features are available in the
Campaign interface.
The IBM® installer sets this property to
Yes for the default partition in your
eMessage installation. For additional partitions where you installed
eMessage, you must configure this property manually.
Campaign|partitions|partition[n]|server|internal
After installing the Interact design environment, this configuration property should be set to
Yes to enable the
Interact design environment in
Campaign.
If Interact is not installed, set to
No. Setting this property to
No does not remove
Interact menus and options from the user interface. To remove menus and options, you must manually unregister
Interact using the
configTool utility.
Campaign|partitions|partition[n]|server|internal
Enables integration with Marketing Operations for this partition, if the integration is enabled in the
Platform configuration settings. For more information, see the
IBM® Marketing Operations and Campaign Integration Guide.
Campaign|partitions|partition[n]|server|internal
Campaign|partitions|partition[n]|server|internal
For this partition, enables access to campaigns created before Marketing Operations and
Campaign were integrated. Applies only if
MO_UC_integration is set to
Yes. Legacy campaigns also include campaigns created in
Campaign 7.x and linked to Plan 7.x projects. For more information, see the
IBM® Marketing Operations and Campaign Integration Guide.
IBM® Marketing Operations - Offer integration
Campaign|partitions|partition[n]|server|internal
Enables the ability to use Marketing Operations to perform offer lifecycle management tasks on this partition, if
MO_UC_integration is enabled for this partition. Offer integration must be enabled in your
Platform configuration settings. For more information, see the
IBM® Marketing Operations and Campaign Integration Guide.
Campaign|partitions|partition[n]|server|internal
Enables Digital Analytics online segment integration for a Campaign partition. If you set this value to
Yes, the Select process box in a flowchart provides the option to select
Digital Analytics Segments as input. To configure the Digital Analytics integration for each partition, choose
Settings > Configuration > Campaign | partitions | partition[n] | Coremetrics.
Campaign|partitions|partition[n]|server|internal
The default value of 100 means Campaign examines the first 50 and the last 50 line entries in the delimited file.
Campaign then allocates the field length based on the largest value it finds within those entries. In most cases, the default value is sufficient to determine field lengths. However, in very large delimited files, a later field might exceed the estimated length that
Campaign computes, which can cause an error during flowchart runtime. Therefore, if you are mapping a very large file, you can increase this value to make
Campaign examine more line entries. For example, a value of 200 makes
Campaign examine the first 100 line entries and the last 100 line entries of the file.
Copyright IBM Corporation 2015. All Rights Reserved.
|